infoFormula used in this calculation is from the famous Wheelers approximations which is accurate to <1% if the cross section is near square shaped. L (uH) =31.6*N^2* r1^2 / 6*r1+ 9*L + 10*(r2r1) where…

NOTEThis formula applies at ‘low’ frequencies (<3MHz) using
enameled copper wire tightly wound.
Please note that the diameter is measured from center of wire trough
center of the coil and to center of the wire on the opposite side.
If it may happen that you find this multilayer aircoil calculator interesting for others, please consider sharing it.
Please rate this article: